Stone Protection Set – Cleaning & Care

Filter
Sale!

CHF 51.05

SKU:5.081 Category:

Description

Stone Protection Set – Cleaning & Care

Protects all absorbent natural and artificial stone surfaces from oil, grease and water stains. Benke stone protection does not change the appearance of the stone. No shine and no darkening. Ideal for stain-repellent treatment of floors in kitchen and dining areas, bathrooms, tables, worktops, garden and patio slabs, walkways, walls, facades and much more. Benke stone protection is ready-to-use and based on impregnating substances dissolved in water-soluble, organic solvents and water. Special water- and oil-repellent substances prevent the penetration of oil, grease, dirt and moisture. The reduced moisture absorption also protects against algae and moss infestation. The pores are not closed. As a result, no film formation occurs and the natural appearance is preserved. Stone Protection can be applied to untreated or already siliconised slabs. The impregnation makes cleaning considerably easier, increases slip resistance, reduces maintenance costs and increases value retention.

Area of application
For indoor and outdoor use, for new installations as well as for tiles that have already been used.
For all absorbent natural and artificial stone surfaces such as;

  • Granite
  • Slate
  • Sandstone
  • Clinker
  • Clay tiles
  • Brick coverings
  • Concrete
  • Solnhofer
  • Terrazzo
  • Cotto
  • Teracotta
  • Porcelain stoneware and absorbent joints.

Not suitable for: Polished, glazed and non-absorbent coverings.

Instructions for use
Carry out final cleaning before impregnating.
Vacuum or sweep the floor. Wet clean heavily soiled stone with Benke Multinet basic cleaner. Then rinse with plenty of water so that no surfactant residues remain and allow to dry thoroughly. Multinet does not attack the impregnation and can therefore also be used later as a basic cleaner in case of heavy soiling. The product is ready for use and can be applied undiluted to clean dry floor coverings 1-2 times evenly with a brush, paint roller, paint applicator or mop, depending on the absorbency.
Optimum object temperature 12-25°C.

Outdoors: Do not apply when there is a risk of rain or direct sunlight.
Indoors: Switch off floor heating 12 hours before impregnation.

IMPORTANT:
Stone impregnation may only be applied to completely dry and absorbent surfaces. It is recommended that a test surface be made.

Consumption
Initial impregnation: approx. 60 – 100 grams per m2 (depending on absorbency) 1 litre in a set for approx. 12 m2.
Re-impregnation: approx. 30 – 50 grams per m2.
Apply only as much as the floor covering can absorb.
Benke Stone Protection must be completely absorbed into the stone.
Avoid puddles and drips or wipe off immediately.
For particularly absorbent substrates (e.g. sandstone), repeat the process after approx. 10 minutes. Allow to dry. The floor can be walked on again after approx. 3-4 hours. Full impregnation effect after 24 hours.

Technical data
Shelf life: 2 years
Storage: do not store above room temperature
Ingredients: Siloxanes, hydrocarbons

Other information
Biodegradable and persistent;
The surfactants contained in this product meet the conditions of biodegradability as laid down in Regulation (EC) No 648/2004 on detergents.

Packaging unit
1 litre bottle Stone impregnation
500ml Multinet (basic cleaner)
500ml Alco – Star (maintenance cleaner for after impregnation)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.